SRS Outer Barrel Stabiliser

Designed primarily to stabilise the fluted outer barrel on the 22" SRS A2, as the longer outer barrel can easily flex and lead to considerable accuracy issues. 
As even a small amount of movement means the barrel will not sit back in the exact same place each time, and therefore change the zeroing point compared to the scope.

Generally the shorter SRS or the sport barrels (hollow "bull barrel") do not suffer from this effect, however you should be able to see if this part is required by pushing sideways on the outer barrel to see how much flex there is. 

To install, just remove any suppressors or muzzle attachments and slide the stabiliser over the barrel and into the end of the handguard. There will be a tight friction fitment. 

Currently only compatible with the 20mm"fluted" barrel and the Metal MLOK handguard.
So far I have only encountered this issue with the above sped, however If you have an alternate setup that requires this style of stabiliser, please get in touch and I will design a version with those measurements. 

Printed in PLA-CF